Type of resources
Contact for the resource
The EMODnet (European Marine Observation and Data network) Geology project (http://www.emodnet-geology.eu/) collects and harmonizes marine geological data from the European sea areas to support decision- making and sustainable marine spatial planning. The partnership includes 36 marine organizations from 30 countries. The partners, mainly from the marine departments of the geological surveys of Europe (through the Association of European Geological Surveys-EuroGeoSurveys), have assembled marine geological information at a scale of 1:250 000 from all European sea areas (e.g. the White Sea, Baltic Sea, Barents Sea, the Iberian Coast, and the Mediterranean Sea within EU waters). This data includes the EMODnet seabed substrate map at a scale of 1:250 000 from the European marine areas. Traditionally, European countries have conducted their marine geological surveys according to their own national standards and classified substrates on the grounds of their national classification schemes. These national classifications are harmonized into a shared EMODnet schema using Folk's sediment triangle with a hierarchy of 16, 7 and 5 substrate classes. The data describes the seabed substrate from the uppermost 30 cm of the sediment column. The data has been generalized into a target scale (1:250 000). The smallest cartographic unit within the data is 0.3 km2 (30 hectares). Further information about the EMODnet-Geology project is available on the portal (http://www.emodnet-geology.eu/).
The 1:250 000 data on the soft and hard areas of the seabed supplements the seabed substrate data produced by the Geological Survey of Finland (GTK) for areas for which actual survey data is unavailable. The data covers two categories; hard and soft seabed areas. The substrate types categorised as hard seabed areas cover types ranging from gravel to boulders and exposed rock, and the substrate types for soft seabed areas cover types from silt to sand. The model is based on the marine geological survey data of GTK, the substrate observations made by the Finnish Environment Institute (SYKE) and Metsähallitus, and on the environment variable data produced by the Finnish Inventory Programme for the Underwater Marine Environment, VELMU, particularly on depth and seabed openness models. The data has undergone statistical evaluation and the ultimate model is based on expert estimates and modelling. At its most precise, the data is at a scale of 1:250 000 and the areas with a size less than 0.3 square kilometres have been removed. The substrate type information pertaining to restricted areas has been removed from the final data. A permit (AK15246) for publishing data with a similar scale, i.e. the EMODnet data, was received from the Defence Command of the Finnish Defence Forces on 28 July 2014.
Municipal Division is a dataset depicting the municipal division in the whole of Finland. The Municipal Division dataset is produced in scales 1:10,000, 1:100,000, 1:250,000, 1:1,000,000 and 1:4,500,000. The data included in the dataset in scale 1:10,000 are taken from the cadastral registry. Regarding other scales, municipal boundaries have been generalised to suit the scale in question. The Municipal Division dataset is available as products both in vector and raster format. The products in vector format contain the number codes of the municipalities, the names of the municipalities in both Finnish and in Swedish as well as municipal boundaries and municipal geographical areas. In addition, the vector product includes the corresponding information about the regions, the State Administrative Agencies and the nation as well as a specification of the municipality's area into land and water area in MapInfo and Shape format. Products in raster format include municipal boundaries only. The product belongs to the open data of the National Land Survey of Finland. More information: Topographic data and how to acquire it http://www.maanmittauslaitos.fi/en/maps-and-spatial-data/expert-users/topographic-data-and-how-acquire-it .
The Topographic map series is a dataset depicting the terrain of all of Finland. The key elements in it are the road network, buildings and constructions, geographic names, waterways, land use and elevation. The more precise levels of the Topographic map series consist of the same map objects and map symbols depicted in the same way as in the familiar Basic map. Basic map raster is applicable to be used, for instance, as a base map for planning land use or for excursion and outdoor recreational purposes in mobile devices and in various Internet services associated with nature. When going over to the more general datasets in the Topographic map series, the number and visualisation of objects and map symbols changes. The generalised small-scale Topographic maps raster are applicable to be used as approach maps in e.g. mobile devices and Internet services. The product belongs to the open data of the National Land Survey of Finland. More information: Topographic data and how to acquire it http://www.maanmittauslaitos.fi/en/maps-and-spatial-data/expert-users/topographic-data-and-how-acquire-it
The data on acid sulfate soils in 1:250 000 scale contains material generated since 2009 on the existence and properties of sulfate soils on the Finnish coastal areas and their drainage basins roughly up to the highest shoreline of the ancient Litorina Sea. The data contains the following levels: - Acid sulfate soils, 1:250 000 maps o Probability of the existence of acid sulfate soils o Probability of the existence of coarse-grained acid sulfate soils - Acid sulfate soils, profile points on 1:250 000 maps - Acid sulfate soils, survey points on 1:250 000 maps - Acid sulfate soils, profile point fact sheets on 1:250 000 maps The data gives a general outlook on the properties and occurrence of acid sulfate soils. The regional existence of sulfate soils is presented as a regional map plane using a four-tiered probability classification: high, moderate, low and very low. These classifications are complemented with regional planar data on whether the acid sulfate soil is coarse-grained, since its properties are significantly different from typical fine-grained sulfate soils. The drilling point (profile points and survey points) observations and analysis data are presented as point-like data on the map and as profile point fact sheets linked to points The survey data can be utilised, for example, in the planning and execution of land use and water management as required by environmental protection and land use. The survey scale is 1:20 000 – 1:50 000. The observation point density is 1–2 / 2 km² on average, and the minimum area of the region-like pattern is usually 6 hectares. The surveys collected data on the lithostratigraphy, existence of sulfide and the depth where found, and the soil pH values. The survey depth is three metres. The laboratory analyses included the determination of elements with the ICP-OES method and pH incubation. The data is published in GTK’s Acid Sulfate Soils map service.
Seabed substrate 1:250 000 is one of the products produced in the EMODnet (European Marine Observation and Data network) Geology EU project. Project provided seabed geological material from the European maritime areas. The EMODnet Geology project (http://www.emodnet-geology.eu/) collects and harmonizes geological data from the European sea areas to support decision-making and sustainable marine spatial planning. The EMODnet Geology partnership has included 36 marine organizations from 30 countries. This data includes the EMODnet seabed substrate map at a scale of 1:250 000 from the Finnish marine areas. It is based on the data produced on a scale of 1:20 000 by the Geological Survey of Finland (GTK), which does not cover the whole Finnish marine area yet. The seabed substrate data will be updated with a new interpreted data on a yearly basis.The data has been harmonized and reclassified into five Folk substrate classes (mud, sandy clays, clayey sands, coarse sediments, mixed sediments) and bedrock. The data describes the seabed substrate from the uppermost 30 cm of the sediment column. The data have been generalized into a target scale (1:250 000). The smallest smallest cartographic unit within the data is 0.3 km2 (30 hectares). Further information about the EMODnet-Geology project is available on the portal (http://www.emodnet-geology.eu/). Permission (AK15246) to publish the material was obtained from the Finnish Defence Office 28.07.2014
National Land Survey's Topographic map series in vector format is a dataset depicting the terrain of all of Finland. The most important elements are the road network, administrative borders, preservation areas, population centres, geographic names, waterways, land use and elevation. The largest scale level (1:100,000) of the Topographic map series in vector format is produced by generalising from the Topographic database. Topographic map series 1:250,000 is produced by generalising the dataset 1:100,000. Topographic map series 1:1,000,000 is produced by generalising the dataset 1:250,000. Topographic map series 1:4,500,000 is produced by generalising the dataset 1:1,000,000. The geographic names have been generalised from the geographic names in the Geographic Names Register to map names suited to the scale in question. The administrative borders in the Municipal Division of each scale are used as administrative borders. The product belongs to the open data of the National Land Survey of Finland. More information: Topographic data and how to acquire it http://www.maanmittauslaitos.fi/en/maps-and-spatial-data/expert-users/topographic-data-and-how-acquire-it.
Lack of spatial soil data in digital form has been a primary obstacle in establishing European policies on land use and environmental protection. Abundant data on soil characteristics exist in Finland but have been scattered among various sources, making it difficult for authorities to make country-wide presentations and predictions.The objective of the project was to create georeferenced soil map and database according to the instructions of the European Soil Bureau using data from existing databases and collecting some new data. The basis of the work was a geological map of quaternary deposits, which describes the soil at a depth of 1 metrem (parent material) according to the Finnish classification based on the concentration of organic matter and the texture of mineral material. Primary research topics included generalization methodology of soil polygons with GIS technology, calculation of soil characteristics needed in the database and computerizing the existing non-digital soil information. It was proved that aerial geophysics can be used for separation of shallow peats from deep peat soils and muddy soils and other wet areas can be identified. Soil names according to the FAO/Unesco system and the World Reference Base for Soil Resources (WRB-2014) were derived from the soil names of the Finnish soil classification system and geophysical data. Soilscape (Soil Mapping Units) of Finland with WRB-2014 soil classification, intented to be used in European scale e.g to delineate risk areas mentioned in soil framework directive proposal.
Maakuntakaavayhdistelmässä esitetään yhdellä kartalla voimassa olevat maakuntakaavat. Suunnittelussa on käytetty SYKE:n, tieviranomaisten ja kuntien paikkatietoaineistoja, tutkimuksia sekä suunnitelmia. Aineistot on yhdistetty alkuperäisistä maakuntakaavaan käytetyistä vektoriaineistoista soveltuvaksi karttapalvelukäyttöön. Viralliset pdf-dokumentit löytyvät Keski-Suomen liiton sivuilta osoitteesta www.keskisuomi.fi. Aineisto soveltuu kunta- ja aluesuunnitteluun sekä kaavoitukseen. Aineisto sisältää Keski-Suomen maakuntakaavan aluevaraukset, osa-alueet, reitit, tiet ja radat, johtoverkon, kehittämisperiaatteet, joukkoliikenteen kehittämisperiaatteet sekä kohdemerkinnät. Tarkastelumittakaava on 1:250000. Resurssin tarjoaa Varsinais-Suomen paikkatietokeskus Lounaistieto. Karttapalvelussa käytetty symboliikka ei täysin vastaa paperikarttojen visualisointia. Vastuutahona toimii Keski-Suomen liitto (Sepänkatu 4, 40100 Jyväskylä, firstname.lastname@example.org).
Maakuntakaava on kartalla esitetty suunnitelma alueidenkäytön ja yhdyskuntarakenteen periaatteista sekä maakunnan kehittämisen kannalta tarpeellisista alueista. Lapin maakuntakaavayhdistelmä kattaa Lapin maakunnan alueella olevat maakuntakaavat. Maakuntakaavojen mittakaava vaihtelee välillä 1:250 000 ja 1: 100 000. Lapin ensimmäinen maakuntakaava on saanut lainvoiman vuonna 2001, jonka jälkeen on laadittu neljä osa-alueittaista kokonaismaakuntakaava ja kuusi vaihemaakuntakaavaa. Voimassa olevat kokonaismaakuntakaavat: • Rovaniemen maakuntakaava (saanut lainvoiman 4.12.2001) • Itä-Lapin maakuntakaava (saanut lainvoiman 25.11.2004) • Pohjois-Lapin maakuntakaava (saanut lainvoiman 28.1.2008) • Tunturi-Lapin maakuntakaava (saanut lainvoiman 16.5.2012) • Länsi-Lapin maakuntakaava (saanut lainvoiman 11.9.2015) Voimassa olevat vaihemaakuntakaavat: • Lapin meri- ja rannikkoalueen tuulivoimamaakuntakaava (saanut lainvoiman 16.7.2005) • Rovaniemen vaihemaakuntakaava (saanut lainvoiman 25.6.2010) • Kemi–Tornio-alueen ydinvoimamaakuntakaava (saanut lainvoiman 21.9.2011) • Soklin kaivoshankkeen vaihemaakuntakaava (saanut lainvoiman 16.5.2012) • Suhangon kaivoshankkeen vaihemaakuntakaava (saanut lainvoiman 12.2.2016) • Kemi–Tornio-alueen ydinvoimamaakuntakaavan osittainen kumoaminen (saanut lainvoiman 16.2.2017)